Saltdogg 8' V Box 2.0 Yd Stainless Steel Gas Salt Spreader 1400050SS @OEM Buyers SaltDogg
$$5,216.25In stockSalt Spreaders \ Saltdogg \ V-Box Gas1400050SS
1400050SS
Saltdogg 8' V Box 2.0 Yd Stainless Steel Gas Salt Spreader 1400050SS @OEM Buyers SaltDoggSaltdogg 8' V Box 2.0 Yd Stainless Steel Gas Salt Spreader 1400050SS
Buyers Products SaltDogg 2 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a salt/sand mix. Its 8 ft hopper can fit in an extended-bed 1 ton truck. With electric start and in-cab throttle control, the spreader combines the power of a ...
OEM Buyers SaltDoggSaltdogg 8
Saltdogg 8' 2.0 Yd Stainless Gas Salt Spreader
Saltdogg 8

OEM Buyers SaltDogg

Saltdogg 8' V Box 2.0 Yd Stainless Steel Gas Salt Spreader 1400050SS @OEM Buyers SaltDogg

Saltdogg 8' V Box 2.0 Yd Stainless Steel Gas Salt Spreader 1400050SS

Stainless Steel - Standard Chute - Gas Engine 

$5,216.25 Original Price: $6,396.00 18% off

Item #: 1400050SS

Quantity:
Add to Cart
Add to Wishlist
  • Create a New List
Details
Buyers Products SaltDogg 2 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a salt/sand mix. Its 8 ft hopper can fit in an extended-bed ... read more
  • Designed for 1 ton trucks.
  • Capacity: 2 cu. yds. (8')
  • Material spread up to to 30'
  • 10.5 HP Briggs & Stratton Intek industrial/commercial gasoline engine. Comes equipped with alternator and 12-Volt electric starter.
  • Conveyor: 12" wide steel pintle chain. Heavy-duty drive shaft is sealed with grease fittings. Idler shaft with sprocket has heavy-duty 1" diameter ball bearings.
  • Conveyor Gear Case: Gear ratio is 20:1 with 1" input shaft and 1-1/8 output shaft on tapered roller bearings.
  • Feedgate: Lever operated with friction lock for accurate adjustment.
  • Includes two top screens, stainless steel inverted V, hold-down kit.
  • Spreads bulk salt or a salt/sand mix.
  • n-cab controls with independent variable speeds for the conveyor and spinner.
  • Made in the USA.
Description

Buyers Products SaltDogg 2 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a salt/sand mix. Its 8 ft hopper can fit in an extended-bed 1 ton truck. With electric start and in-cab throttle control, the spreader combines the power of a gas engine with modern spreader conveniences.

A SaltDogg stainless spreader is an investment made to last. Its hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. The hopper also comes outfitted with a top screen. The spreader is powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up.

A 12 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Adjustable baffles allow you to adjust the spread pattern to match your use.

The spreader comes equipped with a 12V electric clutch and in-cab, 3 position momentary switch and throttle.
Product Common Use: Residential & Commercial Spreading, Parking Lots, Driveways, Sidewalks

Attachments
SCH096 Series Installation InstructionsSCH096 Series Installation Instructions8 ft. Self Contained Hopper Spreaders, Carbon Steel & Stainless Steel (Applies to spreaders equipped w/ Tecumseh Formula XL/C 10.0 HP engine, SERIAL NUMBERS 2810 - 4883)
SCH/1400 Series Installation InstructionsSCH/1400 Series Installation Instructions6ft., 8ft., 10ft. Self Contained Hopper Spreaders, Carbon Steel & Stainless Steel (Applies to 72" Spreaders – SERIAL NUMBERS 1200 & above; 96" Spreaders – SERIAL NUMBERS 4884 & above; 120" Spreaders–
You might be interested in these items
Additional Info
PART #: 1400050SS
SPREADING MATERIAL: Bulk Salt; 50/50 Salt/Sand mix
SPREADING WIDTH: 2-30 ft.
CAPACITY: 2 cu. yds.
VEHICLE APPLICATION: 3/4-Ton & 1-Ton Trucks
CHUTE: Standard
WEIGHT: 750 lbs.
OVERALL HEIGHT: 115.7"
OVERALL WIDTH: 32.1"
OVERALL LENGTH: 47"
HOPPER WIDTH: 47"
HOPPER LENGTH: 96"
TOP SCREEN: 1/4" Black Powder Coated Steel
COVER: Optional
VIBRATOR: N/A
INVERTED V: Stainless Steel
FRAME: N/A
HOPPER: Stainless Steel
POWER SOURCE: 10.5 HP Briggs & Straton Intek Gas Engine
FEED MECHANISM: 12"W Conveyor
SPINNER: 12.5"
CONTROLLER: In-Cab Control Console
MOUNTING: 4-Point Tie Down System

 

Customer Reviews
Share your thoughts with other customers
Login to leave a review
Return Policy
RETURN POLICY

WHAT IS THE FIRST STEP?

The first step is to obtain RMA # (return merchandise authorization number) for your return/exchange. Contact us via phone (815) 469-1300), email ([email protected]), or feel free to stop by our retail center to request a RMA. NO RETURNS will be accepted without a Return Merchandise Authorization number (RMA).

RETURN/EXCHANGE REQUIREMENTS

· Obtain RMA # (return authorization number): We issue your RMA # via phone, email address, or fax.

· Return Deadline: To avoid a lengthy return process orders must be returned within 30 business days of purchase. Any returns after 30 days will be rejected no exceptions.

· RMA Period: Return Merchandise Authorization's will not be accepted outside of 15 days from the date of issue.

· Return Shipping: The customer is responsible for all return shipping costs as well as any refusal or reroute fees unless in error by Central Parts Warehouse.

· Special Orders: Special order items require a non-refundable deposit. Special ordered items are defined as items that were special ordered from our suppliers specifically to fulfill your order.

· The deposit covers fees we have to pay to our suppliers, and the man hours we have lost on canceled orders.

EXCHANGE PROCEDURE

· Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. Upon receipt of your returned product we will process an exchange and ship the new part.

· Option 2 (Faster) - Order the new part online or over the phone so it can be shipped to you right away. Then request an RMA using a standard Return Procedure for the part you would like to return. Upon return of the part a refund will be issued promptly. Any price differences will be adjusted.

IS THERE A RESTOCK FEE?

· A 20% restocking fee will be levied on all returns unless in error by Central Parts Warehouse or one of our manufacturers.

NON-RETURNABLE ITEMS

There are certain circumstances where we cannot accept returns on items under any circumstances.

Equipment

  • We accept exchanges on equipment in the case of damage, or defect.
  • Defective equipment will be sent to the manufacture under warranty.
  • In cases of visible damage DO NOT sign for it, the shipper will return to us. If you do sign for equipment with visible damage we cannot accept a return/exchange.
  • In cases of concealed damage contact us within 48 hours of receiving the equipment, no exceptions.
  • Customers must sign a release of liability form anytime equipment is not recommended for your vehicle by manufactures. There are NO returns/exchanges once you sign this form.

Used/Installed Parts: Unfortunately, we cannot accept any used parts for return or exchange for any reason.

Electrical Parts: There are no returns on any electrical items or oil. We ask that you research before ordering.

· Electrical items include, but are not limited to solenoids, plow lights, wiring harnesses, motors, transmissions etc.

· If you think the part is defective prior to installation we can send to the manufacturer to determine whether or not it will be covered under manufacturer warranty.

Defective Parts: If you do have a defective part, we handle that in one of two ways:

1. We will issue you a RMA to return the part. We will return it to the manufacturer under warranty, if it's found to be defective; we will send out the replacement order at the manufacturer’s expense.

2. If you are unable to wait for the warranty process, we will charge you for a replacement, and send it out ASAP. We will issue a RMA for you to send back the defective item(s). When the defective item has been received, we will return it to the manufacturer under warranty. If it's found to be defective we will issue a refund including return shipping.

WHAT ELSE SHOULD I KNOW ABOUT RETURNS/EXCHANGES?

Rejected/Unauthorized Returns/Exchanges: If we receive an unauthorized return without a RMA number we will make 3 attempts to return the item(s) within a 14 day timeframe at the expense of the customer. If we are unable to contact the customer during that timeframe your item(s) will be discarded without refund.

Combo/Quantity Deals: If you return equipment which you purchased as a combo you will lose your combo discount. If you exchange equipment which was purchased as a combo your combo discount will be adjusted. If you purchase a certain quantity of parts for discount you will lose your quantity discount if you return part of that order.

Refunds: Refunds are issued once we receive your returned items. From there your refund will be processed, funds will be returned to you within 2-5 business days. Refunds are typically issued using the same payment method as your purchase.

· The refund amount will be composed of the original purchase price minus any fees if applicable.

Ordering Conveyor Chains

  • Due to the sensitive nature of conveyor chains we require our customers to complete a Conveyor Chain Specification Sheet before purchasing a conveyor chain if you don’t have a part number.

· If you know the correct part number for the conveyor chain we can make an exception, however if the chain does not work the customer is responsible for paying all shipping fees and 20% restocking fee.

· There are no returns on custom chains unless Central Parts has made an error on your order

Shipping: See Shipping Policy

SITE POLICIES, MODIFICATION, AND SEVERABILITY

· We reserve the right to make changes to our site, catalog, policies, and these conditions of use at any time. If any of these conditions shall be deemed invalid, void, or for any reason unenforceable, that condition shall be deemed severable and shall not affect the validity and enforceability of any remaining condition.

· We have a variety of manufacturers each has their own set of rules. We follow the manufactures rules to ensure things are done properly.

· We will make 3 attempts to contact the customer within a 30 day timeframe in order to pay the return shipping. If we are unable to contact the customer your item(s) will be discarded without refund.

SOCIAL MEDIA

NEWSLETTER SIGN-UP


ABOUT US

We are proud to be part of the solution for so many of our customer's needs in the snow plow industry. Central Parts Warehouse is a supplier of services and snow plow equipment. Our business strives in finding you the best suitable and high-quality products for commercial vehicle attachements and equipments. For more than 30 years, CPW has been working with America’s premier manufacturers and revolutionizing the way we deliver to our customers.

This years catalog features over 19 pages of just "V" Box or "Hopper" Salt Spreader parts for such names as Flink, Highway, Henderson, Swenson, Gledhill, Boss, Buyers, Fisher & Western to name a few.

Our customers are at the core of everything we do. At CPW, our whole team created our Core Values so we believe in them wholeheartedly. We are committed to living them purposefully and expect that you will notice it in all of your dealings with our employees.

CONTACT US

  • Sales: (800) 761-1700
  • Other inquiries: (815) 469-1300
  • Fax: (815) 469-6958
  • E-Mail: [email protected]

HOURS

  • Monday-Thursday: 8:00am-4:30pm CST
  • Friday: 8:00am-4:00pm CST
  • Saturday: Only By Appointment
  • Sunday: Closed