Frequently Asked Questions - www.centralparts.com
Qim looking for the wing rubber part as mines ripped. I have the fisher xls. will the western urathane one work on that?i feel the rubber rips to fast.
A

No unfortunatley the western edges will not work. Here is a list of the Urethane edges from Fisher you can choose from: 81082 1 DS Urethane Edge - 8/10 81083 1 PS Urethane Edge - 8/10 81051 1 DS Urethane Edge - 8.5/11 81052 1 PS Urethane Edge - 8.5/11

By umer p on February 28, 2025. 
Was this review helpful to you? yes no
QDoes part number 21501-1 replace part #21501 on the western ultramount plow
A

Yes this is the replacement part. The -1 means they made a change to something. This is still the Hydrauklic pump kit for the Western and Snow Ex Plows.

By Del A on March 03, 2025. 
Was this review helpful to you? yes no
QDo you have a photo of the Meyers right hand hook?
A

Please visit the Meyer Products web page for an exact part number and photo of item. Meyerproducts.com

By Bright W on April 19, 2025. 
Was this review helpful to you? yes no
QI have a 2002 Model Year Fisher 8 Ft. 6" Minute Mount, EZ-Vee Steel Plow. Would like a price for Replacement Hydraulic Cylinder Seal Kits for: ( 1 ) Lift Cylinder( 2 ) Angle Cylinders
A

Per the parts diagram that is online for that cylinder you will need multiple parts. Please call our sales office to confirm this is the cylinder needed for your plow and they will give you pricing for the seal kit needed.

By Jeff M on May 14, 2025. 
Was this review helpful to you? yes no
QHow big are your small decals for a snow foil
A

There are three labels in this kit. They are only available in this kit. The "learn more label" measures at 1.5"x1" . The next 2 labels are the FCC Compliance labels and they measures at 2.75"x1.25".

By John C on May 18, 2025. 
Was this review helpful to you? yes no
QWHAT IS THE HOLE PATTERN ON THIS SPINNER OR CAN I MATCH DRILL TO OLD ONE.
A

Unfortunately without the proper part number to identify which spinner this is it would be hard to say the size of the hole. Please call our sales office to duscuss further.

By steven k on July 22, 2025. 
Was this review helpful to you? yes no
QHi, I have an AirFlow PSV025163 and I am looking to replace the conveyor chain, drive motor and spreader motor. could you assist with this. Thank you
A

Yes we can indeed help you with this. Please call our sales office for assistance. We will need further information from you. 815-469-1300

By Robert S on August 18, 2025. 
Was this review helpful to you? yes no
QWill This work with the ultramount 2
A

The PDK5's only work with SnowEx and Western Plows and they will work with lift kits up to 6". If you have any other questions please contact our sales office @ 815-469-1300.

By John J on September 15, 2025. 
Was this review helpful to you? yes no
QIs this listing for 6 different fisher parts posters? I'm looking for mm2 but all of them would be cool. It says that minute mount 2 poster is discontinued and unavailable
A

Fisher Minute Mount 2 is not discontinued. Please call our sales office to get more information on the parts you are looking for.

By DENNIS L on September 23, 2025. 
Was this review helpful to you? yes no
QAre these Chinese hoses?
A

Our manufacturer supplier is based out of Ohio.

By Christopher T on September 24, 2025. 
Was this review helpful to you? yes no
Qi have f250 , super duty , 2009 this its my new trucki have a plow LPLD-7.5 PART # 09275I NEED a truck frame for that plow for my new truck f250 super duty 2009 can u guys help me get the right part thank you
A

Unfortunately you cannot transfer your Lot Pro Light duty to your Ford F250. Those plows are made for 1/2 ton and SUVS only. Please call Meyer for more clarification on upfitting.

By michell i on September 26, 2025. 
Was this review helpful to you? yes no
QI have an Airflow SS spreader AF-PS serial # 13401. The gearbox resembles a Buyers SCH but I am looking to confirm that the 1401200 is the replacement. I currently have an open cart with the Fisher HD gearbox and sprockets. I would like to put these together to ship at the same time.Thank you Roland
A

More information would be needed to confirm this gearbox. Please call our sales office so they can help you.

By Roland G on September 28, 2025. 
Was this review helpful to you? yes no
QWhat is the height of this light
A

The height of the 7945A is 4.9". If you have any other questions please call our sales office.

By Dale W on October 02, 2025. 
Was this review helpful to you? yes no
QDoes this come with all the hardware?
A

This Turf Defender Kit comes with all of the necessary hardware for installation.

By Robert M on October 06, 2025. 
Was this review helpful to you? yes no
QIm looking to setup the truck side of my 2024 Ram 2500 with 6.7 diesel with snow chief prep package. I need everything to wire in for a Fleet Flex Fisher plow and controller.
A

We would be happy to help you with this. Please call our sales office to speak with our sales staff to get you taken care of. 815-469-1300

By CRAIG R on October 13, 2025. 
Was this review helpful to you? yes no
Qdo they make this gear box with a 1.250 output shaft 18" long and a input shaft 1" x 8" long ?
A

We are not a Henderson dealer however you can call our sales office to inquire more about this gearbox.

By Clifton T on October 14, 2025. 
Was this review helpful to you? yes no
QI have a 2007 Chevy Silverado 2500. The plow I have is on a 1998 Chevy Silverado 2500 would this mount fit that?
A

Please call our sales office so we can run your vehicle through the match system to confirm.

By billy p on October 15, 2025. 
Was this review helpful to you? yes no
QI have a 2007 Chevy Silverado 2500. The plow I have is on a 1998 Chevy Silverado 2500 would this mount fit that?
A

I am assuming that on your 1998 you have a 17119 classic mount. It would not transfer over to your 2007 2500. You would need an EZ Plus mount for that model. Which would be a 17139. What type of plow do you have? Is it a classic mount or EZ Plus? Tubular steel or round?

By billy p on October 15, 2025. 
Was this review helpful to you? yes no
QHello, I am looking to install a snowex plow on my 2020 chevy silverado 1500 with a 6" lift and 35" tires. are there specific snowex plows that these work on ,or do they work on all of them. I don't want to install the wrong plow to find out that they will not work. Thanks for the help!
A

Each snow plow manufacturer has very specific criteria as to where the plow must be mounted for it to be used safely and properly. Even with the drop kits that some manufacturers now offer, some trucks (like yours) unfortunately are just too high for plow installation.

By Todd L on October 15, 2025. 
Was this review helpful to you? yes no
Qwhat are the spec. on this gear box , shaft length ,size ,bolt pattern ,key way
A

The specs for the gearbox are: Size: 67.7/Ratio: 20:1/It Measures: Input Shaft: 1.0" Dia x 9-1/4" Long with 1/4" KW the entire shaft length Out put shaft: 1-1/8" Dia x 15-3/4" Long with a 1/4" kw x 3" long starting at the housing and another 1/4" x 3" keyway starting 1-3/4" from end of shaft

By Clifton T on October 16, 2025. 
Was this review helpful to you? yes no

SOCIAL MEDIA

NEWSLETTER SIGN-UP

SUBSCRIBE

ABOUT US

We are proud to be part of the solution for so many of our customer's needs in the snow plow industry. Central Parts Warehouse is a supplier of services and snow plow equipment. Our business strives in finding you the best suitable and high-quality products for commercial vehicle attachements and equipments. For more than 30 years, CPW has been working with America’s premier manufacturers and revolutionizing the way we deliver to our customers.

This years catalog features over 19 pages of just "V" Box or "Hopper" Salt Spreader parts for such names as Flink, Highway, Henderson, Swenson, Gledhill, Boss, Buyers, Fisher & Western to name a few.

Our customers are at the core of everything we do. At CPW, our whole team created our Core Values so we believe in them wholeheartedly. We are committed to living them purposefully and expect that you will notice it in all of your dealings with our employees.

SUPPORT

CONTACT US

  • Sales: (800) 761-1700
  • Other inquiries: (815) 469-1300
  • Fax: (815) 469-6958
  • E-Mail: [email protected]

HOURS

  • Monday-Thursday: 8:00am-4:30pm CST
  • Friday: 8:00am-4:00pm CST
  • Saturday: Only By Appointment
  • Sunday: Closed
mastercard
visa
american express
discover
Your Customer Reference #: 298-577-841-7
Switch to Desktop
Central Parts Warehouse - Snow Plow Parts For Less